 |
|
 |
| |
 |
| |
|
| |
Why buy Ferri?
• Established in 1844, Ferri have over 160 years experience in the industry and produced their first hydraulic hedgecutter in 1979 with over 17,000 units produced to date.
• Extensive use of drop-forged steel on components such as hinge points, ram mounts and head mounts gives greater strength and integrity than pre-drilled mild steel hinge brackets used on competitor models (which will distort during the welding process)
• All of our Ferri hedgecutters are fully tested before they leave the factory. In order to ensure that all functions are working properly, the cutters must be filled with oil. This oil is left in the machines after the testing, therefore they are dispatched full and there is no need for you to refill them before you want to use it.
• Huge range of hedgecutters suitable for individual needs
• Great value for money |
|
|
T A Range
For use in gardens or for landscape applications. Ideal for narrow entrances or areas where space is restricted
• TA26 (2.7 m horizontal reach RH model)
• TA32 (3.24 m horizontal reach LH model)
• 0.8m top-mounted floating flail head
• Totally independent on-board hydraulics
• Reversible rotor
• Mechanical breakaway
• PTO pump |
|
|
T D Range
Suitable for landscape applications
Designed for compact tractors between 40hp and 70hp
Choice of two left hand models - TD37 (3.65 m horizontal reach) TD42 (4.23 m horizontal reach)
• 1m top-mounted floating flail head
• Totally independent on-board hydraulics
• Reversible rotor
• Mechanical breakaway
• Optional oil cooler
|
|
|
|
Please click to download the
T D Range Specification. |
|
T M 47 Range
Ideally suited to verge mowing or hedge cutting
Designed for tractors between 50hp and 70hp
• Patented cranked second arm – allows mowing behind rear tractor wheel and hedgecutting close to the tractor. Also allows head to be stowed safely and compactly behind tractor for transport
• 1.25m double helix rotor – provides good overlap for smooth cutting
• 4.73 m horizontal reach
• Rear mounted floating flail head
• Totally independent on-board hydraulics
• Rotor reversible
• Extensive drop forged pivot points
• Cast iron pump and motor
|
|
|
|
Please click to download the
T M 47 Range Specification. |
|
T P Range
Ideally suited for agricultural work or small contractors
Designed for tractors between 50hp and 80hp
• Delta box – counterbalances weight distribution to give greater stability
• 6 m horizontal reach
• Rear mounted floating flail head
• Totally independent on-board hydraulics
• Reversible rotor
• Extensive drop forged pivot points
• Double helix overlap rotor
• Cast iron pump and motor
• Optional cutter bar, proportional joystick controls, oil cooler and lift float
|
|
|
|
Please click to download the
T P Range Specification. |
|
T S E Range
High specification models specifically for high
work loads
• 8 heavy-duty models available with horizontal reaches between 5-7m
• Telescopic extension on the second arm (58Z & 70Z models only)
• High performance cast iron worm gear box
• Totally independent on-board hydraulics
• Spiral rotor flail heads with 40% overlap
• Extensive drop forged pivot points
• Double helix overlap rotor |
|
|
|
Please click to download the
T S E Range Specification. |
|
T X V Range
Ideal for contractors working with the machine
every day
• Forward positioned flail head
• 6.2m reach
• High performance cast iron worm gear box
• Totally independent on-board hydraulics
• Spiral rotor flail heads with 40% overlap
• Extensive drop forged pivot points
• Double helix overlap rotor |
|
|
|
Please click to download the
T X V Range Specification. |
|
TGA 46 Range
Ideal for farmers and smaller contractors
Suitable for tractors from 60hp
• 4.7m horizontal reach
• Parallel arm to maintain head position
• Hydraulic break-back with auto reset as well as mechanical break-back
• Central pivot position for ideal balance
• Totally independent on-board hydraulics
• Rotor reversible from the cab
• Rear mounted flail head with 1.25m width cut
• Cable controls |
|
|
|
Please click to download the
T G A 46 Range Specification. |
|
TGA 50 and TGA 58Z Range
High specification parallel arm machines particularly aimed for use by contractors
Suitable for tractors from 70hp.
• 5m or 5.8m horizontal reach
• Telescopic extension arm (58Z model only)
• Parallel arm to maintain head position
• Rear mounted flail head with 1.25m width cut
• Spiral rotor with 40% overlap
• Hydraulic break-back with auto reset
• Central pivot position for ideal balance
• Totally independent on-board hydraulics
• Rotor reversible from the cab
• High performance worm gear box
• Cable or electro hydraulic low pressure proportional controls. |
|
|
|
Please click to download the
T G A & 58Z Range Specification. |
|
TKD Power
Suitable for tractors from 100hp
• Patented parallel action allows head to be moved forward 1.1m for better visibility and ease of use around posts, road signs, trees etc.
• High position of first arm anchor point allows maximum clearance for working over barriers,hedges, etc. at maximum reach
• All hydraulic rams mounted on top of the power arm sections minimising the risk of damage
• 6 rows of 'Y' multi flails
• Reversible rotor
• Floating head
• Fully independent hydraulic system with piston pump and motor in closed circuit
• Oil cooler with thermostat
• Lift float kit
• High performance cast iron worm gearbox with high torque transmission and helicoidal teet
• 120° power slew
• Hydraulic break-back with accumulator controlled auto-reset
• Low pressure electro-hydraulic controls with joystick operation
• Parallel cylinders for first and second arms
• Adjustable front guards
• Supplied with PTO and full oil tank (155 litres)
|
|
|
|
Please click to download the
T K D Power Range Specification. |
|
|
| |
|
|
 |
